Details   Price: $ 764.00 CAD     Add to Wish List   List Price: $890.80 Expédition: Éligible pour expédition gratuite Shipping: Eligible for FREE Shipping! Description: La description en français sera disponible sous peu SKU: LT-HR626  Voir détails en image ci dessous (si disponible)  See Detailed Image Below (When available)

Description

Mackie HR626 2-Way Active Reference Monitor HR626 Dual 6" 2-Way Active Studio Monitor The first active Mackie studio monitor with a D'Appolito woofer-tweeter-woofer design. It has one 6.7" woofer on each end of the cabinet with the dome tweeter in the center. The monitor can be set up vertically or horizontally, depending on the application. The 2-way biamplified monitor implements servo-feedback circuitry and an elliptical passive radiator to achieve low distortion and extended low-frequency response similar to the HR824. The waveguide-loaded high-frequency aluminum dome tweeter provides the same crisp and evenly dispersed highs as all of Mackie's world-class reference monitors. The 5/8" internally braced MDF cabinet is extremely rigid and non-resonant. The HR626 is the ideal monitor for those who need lots of bottom end, along with the low-level accuracy of the midrange for mixing and vocal placement. Thanks to its D'Appolito driver alignment design, the HR626 can be used in both vertical and horizontal positions. Placing the HR626 in a vertical position provides extremely accurate reference monitoring for mid- to large-sized studios. Because of its symmetrical left-right sound field, it can also be placed horizontally and used as a superior center channel in a 5.1 or 7.1 surround monitoring or home theater system. The D'Appolito driver alignment design provides direct-center alignment of high frequencies in center channel applications and can be set up vertically or horizontally, dependent upon the application. The HR626 also features the D'Appolito crossover for proper phase response. Mackie HR626 Dual 6" 2-Way Active Studio Reference Monitor Specifications: Low-frequency driver Number of drivers: 2 Diameter: 6.7" (170 mm) Sensitivity (2.83V, 1m): 89dB SPL Nominal Impedance : 8 ohms Voice Coil Diameter : 1.25" (32 mm) Power Handling (Long Term/Program): 50/150W Frequency Range: 38Hz to 6kHz Frame: Die-cast aluminum magnet: Ferrite Bucking magnet (shield): Ferrite High-frequency driver Sensitivity (2.83V, 1m): 91dB SPL Nominal Impedance : 6 ohms Power Handling (Long Term/Program): 20/50W Frequency Range: 1.6kHz to 22kHz Diaphragm/Suspension: Aluminum/Impregnated Cloth Voice Coil Diameter : 1.0 inch (25.4 mm) Wave Guide Frequency Response: 2.5kHz to 20kHz, ±2dB Mouth Size: 6.13" diameter (156 mm) Horizontal and Vertical Coverage: 120 degrees, ±10 degrees, 3kHz to 20kHz Passive Radiator: 6-inch x 9-inch (152 mm x 228 mm) mass-loaded elliptical flat piston with variable thickness filleted edge rubber surround. Crossover Section Crossover Type: Modified Butterworth, 18dB/octave @ 1.8kHz Acoustic Section Free-Field Frequency Response: ±1.5dB, 42Hz to 20kHz Lower cutoff frequency: -3dB @ 40Hz Upper cutoff frequency: -3dB @ 22kHz Sound Pressure Level at 1 meter, -7.5dBu into balanced input, 100dB SPL @ 1m Maximum peak SPL per pair: 118dB SPL @ 1m Maximum short term SPL on axis, half space 80Hz to 2.5kHz, 109dB SPL @ 1m Residual Noise (maximum gain, 600 ohms source, 20Hz-20kHz bandwidth) : <8dB SPL @ 1m Rated Line Input Voltage and Power Power Consumption Standby mode: 12 watts Quiescent (idle): 20 watts Musical Program, Loud mix: 105 watts Both channels driven into resistive loading to 1% clipping (LF 86 W/4 ohms source, 20Hz-20kHz bandwidth): 255 watts US: 120 VAC, 60Hz Europe: 240 VAC, 50Hz Korea (AC Power Selector at 240V): 220 VAC, 60Hz Japan (AC Power Selector at 120V): 100V, 50-60Hz Rated Power (For UL-6500, CSA-E65-94, EN-60065)130 watts Amplifier Section Low-frequency power amplifier Rated Power (at 1kHz with 1% THD): 100 watts In Japan (100 VAC): 67 watts Rated Load Impedance: 4 ohms Slew Rate: 15V/uS Distortion (THD, SMPTE IMD, DIM 100): <0.035% Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 100W into 4 ohms): > 101dB Cooling: Convection Design : Monolithic IC, Class AB, Parametric Servo Feedback High-frequency power amplifier Rated Power (at 1kHz with 1% THD): 40 watts In Japan (100 VAC): 28 watts Rated Load Impedance: 8 ohms Slew Rate: 15V/Us Distortion (THD, SMPTE IMD, DIM 100): <0.035% Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8 ohms): >93dB Cooling: Convection Design : Monolith IC, Conventional Class AB System Input Type: Balanced Differential (XLR and 1/4" TRS) Unbalanced (RCA) Input Impedance: 20kOhms Balanced, 10kOhms Unbalanced Input Protection: RFI and Level Protected Input Sensitivity: +4dBu @ 300Hz for full output Maximum Input Level: +20dBu Low Cut Frequency: 80Hz, 2nd Order, Butterworth HF Equalization: Shelving ±2dB @10kHz Acoustic Space A position: -4dB @40Hz, shelving B position: -2dB @ 40 Hz, shelving C position: flat Compressor: Independent high- and low-frequency overload detection Enclosure Alignment: 6th Order Over Excursion Prevention 2nd Order High-Pass Filter Low Line Voltage Shut Down: 67% of Nominal Line Thermal Protection Amplifier Shut-Down, Auto Reset Muting 5 seconds at turn-on Signal Sense Threshold: -74dBu (0.155mV) Driver Protection: Compressor with independent LF and HF overload detection Dimensions: 8-4/5" (224 mm)H x 19-3/5" (498 mm)W x 12-2/5" (315 mm) Deep (including amp) Weight: 31 lbs (14.1kg) Mackie HR626 Dual 6" 2-Way Active Studio Reference Monitor Features: Active Electronics True reference monitoring due to the flat frequency response provided by the active EQ, crossovers, time correction and phase alignment Robust transducer protection against peaks, thermals, RFI and extreme overdrives No outboard amplification required Elliptical Passive Radiator delivers: Extended low frequency response Elliptical geometry makes the most of the cabinet dimensions Servo Feedback Circuit: Lowers the distortion in low frequency range Extends the low frequency response of the woofers Provides tighter mechanical control of the woofers Waveguide-loaded aluminum dome tweeter The tweeter provides the same high-end clarity expected in a Mackie HR monitor The waveguide ensures the high frequencies will be evenly dispersed with the lows The die-cast waveguide looks fabulous, babe! Rear Panel Controls Sensitivity controls for matching monitor levels perfectly Acoustic Space filters to quickly match the monitor with your control room High Frequency +/- 2dB switch to compensate for live/dead acoustic environments High Pass filters accommodate use with subwoofers