Preamplifiers

Produits


  • Focusrite ISA One Analogue Classic Microphone pre-amplifier & Independent DI

    Focusrite ISA One Analogue Classic Microphone pre-amplifier & Independent DI

    Key Features: ISA series transformer-based preamplifier. Flexible independent DI channel. Switchable impedance. Headphone output with volume control. Dedicated insert point. Optional stereo 192kHz A-D converter. Lundahl LL1538 Input Transformer. Backlit VU meter with variable calibration.
    ISA ONE ANALOGUE
    CA$699.00
     
  • TL Audio Ivory 5050 Mono Tube Preamp and Compressor

    TL Audio Ivory 5050 Mono Tube Preamp and Compressor

    The Ivory 5050 came directly from user requests for a simple, yet great-sounding, valve front end and boasts the winning combination of a mic/line/instrument preamp and mono compressor, making it a very cost-effective way of processing your sources. The 5050 now features extras including a 30dB pad, hard/soft knee compression modes, a fully balanced line output, and an optional digital output. The 5050 features two valve stages, one in the preamp circuit, and one in the gain control element of the compressor. These Sovtek valve stages are run from a stabilized 150V DC power supply. So whether it's your best microphone, your vintage Strat, or your latest sample-don't trust it with anything less than the TL Audio 5050. TL Audio TL Audio Ivory 5050 Mono Tube Preamp and Compressor Specifications: Mic Input: Mic Noise (EIN): -127dBu (150 ohm source, 22Hz to 22kHz) Balanced Line Input: Maximum level: +26dBu Balanced Line Output: Maximum level: +26dBu Frequency Response: 10Hz to 40kHz, +0, -1dB Noise: -80dBu (22Hz to 22kHz) Dynamic Range: 100dB (Line input @ 0dB gain) Power Supply: Consumption: 20VA Dimensions: 483 x 200 x 88mm Shipping Weight: 6kg TL Audio TL Audio Ivory 5050 Mono Tube Preamp and Compressor Features: New Preamp stage provides variable Input Gain, +48V, 90Hz filter and 30dB pad Compressor section with control of Threshold, Ratio, Gain Make-Up and Bypass Attack time switchable between Fast (0.5mS) and Slow (20mS) Release time switchable between Fast (40mS) and Slow (2S) Automatic Hold facility reduces low-frequency compressor distortion New hard/soft knee compression modes Output fader permits complete attenuation through to +15dB of extra output gain Two 8 segment LED meters provide indication of output level & gain reduction Front panel instrument DI input Balanced XLR mic input New balanced line input/output on jack connectors New optional 24 bit digital output
    MM-Ivory5050
    CA$699.99
    CA$719.00 économisez 3%
  • TL Audio Ivory 5060 Preset 2-Channel Tube Compressor EQ

    TL Audio Ivory 5060 Preset 2-Channel Tube Compressor EQ

    Using the same high-quality discrete microphone preamp as other Ivory 2 products, the 5060 also has stereo line level or stereo instrument inputs. The 5060 is equally versatile as a front-end tracking device as it is for the final stage mixdown or mastering compressor. One set of controls operates both the channels for quick and easy setup. The compressor section has 15 expertly programmed presets designed to work with a typical selection of vocal and instrumental sources as well as a manual mode for self adjustment of the compressor. The output section includes a Fat EQ switch for adding some presence or weight to your signal. As with all the mono or stereo Ivory 2 units, it is possible to fit the optional D0-2 converter card into the 5060 for premium quality 24-bit SPDIF analog-to-digital conversion. This allows you to connect to your hard disc recorder, mixer, or soundcard in either an analog or digital format. The combination of flexibility, ease of use, and the renowned warmth of the TL Audio valve circuit design makes the 5060 unbeatable for value and performance. TL Audio Ivory 5060 Preset 2-Channel Tube Compressor EQ Specifications: Preamp: Input Gain +16 to +60dB (mic input), -20 to +20dB (line input) Compressor: Threshold: +10 to 0dB Ratio: 1:1.5 to 1:30 Attack: 0.5 or 5ms Release: 0.2 or 1.5s Gain Make Up: 0 to +20dB, Fat EQ +2dB @ 50Hz, -0.9dB @ 720Hz, +1.8dB @ 10kHz Master Section Output Gain: -? to +15dB PSU: Internally adjustable for 230V 50Hz or 115V 60Hz operation Typical Consumption: 30VA Dimensions: W: 483 x H: 88 x D: 200mm (2U 19" rack mounting) Shipping Weight: 6kg TL Audio Ivory 5060 Preset 2-Channel Tube Compressor EQ Features: Valve preamp stage with mic, line, and front panel instrument inputs Compressor with 15 presets and a manual mode with user adjustable controls Hi-pass 90Hz filter on the input stage with Fat EQ contour at the output stage VU metering of output level, output level +10dB and compressor gain reduction One set of controls for mono or stereo use Automatic linking for stereo signals 24-bit digital interfacing via the optional DO-2 digital output card
    MM-Ivory5060
    CA$799.99
    CA$879.00 économisez 9%
  • Avalon Ultra Five Direct Box Instrument Preamplifier

    Avalon Ultra Five Direct Box Instrument Preamplifier

    The Avalon Ultra Five is the most powerful direct box available. Variable gain Class A preamplifier to boost low-level pickup signals and a high-level speaker input for capturing the live sound of the instrument's amplifier. Six passive tone-EQ curves enhance a variety of acoustic and electric instruments. Twin DC-coupled Class A output amplifiers drive both low-level mic preamp inputs and high-level +4dB inputs for direct-to-tape recording or processing. Direct box has dual mic and line outs, very low noise -100dB, high headroom +30dB, low-pass filter, LED active signal indicator, headphone out. Avalon Ultra Five Direct Box Instrument Preamplifier Features: Variable gain Class A preamplifier High-level speaker input for pristine amp capture 6 passive tone-EQ curves enhance a variety of acoustic and electric instruments Twin DC-coupled Class A out Dual mic and line outs Very low noise -100dB, high headroom +30dB, low-pass filter, LED active signal indicator, headphone out
    U5
    CA$835.00
     
  • TL Audio Ivory 5051 Mono Tube Voice Processor

    TL Audio Ivory 5051 Mono Tube Voice Processor

    The single channel voice processor format has become the accepted way of getting the most out of any sound source. The 5051 provides the perfect front end for any system by offering a combined preamp, compressor, equalizer, and noise gate all in one easy-to-use package: now with an optional digital output. The 5051 compressor section is identical to that of the 5021 and includes hard/soft knee modes, and the four-band equalizer section is modeled on that of the legendary TL Audio EQ-1, yielding superb results instantly, with an improved optical gate for removing unwanted source noise. So whatever your source, let the 5051 unlock its true potential. The 5051 features six valve stages, supplied by three twin triode ECC83/12AX7A valves running from a stabilized 150V DC power supply. One valve stage is located in the preamp, one in the compressor gain control circuit, and four in the equalizer section. TL Audio TL Audio Ivory 5051 Mono Tube Voice Processor Specifications: Mic Input: Mic Noise (EIN): -127dBu (150 ohm source, 22Hz to 22kHz) Line Input (Balanced): Maximum level: +26dBu Line Output (Balanced): Maximum level: +26dBu Frequency Response: 10Hz to 40kHz, +0, -1dB Noise: -80dBu (22Hz to 22kHz) Dynamic Range: 106dB Power Supply: Consumption: 20VA typical Dimensions: 483 x 200 x 88mm Shipping Weight: 6kg TL Audio TL Audio Ivory 5051 Mono Tube Voice Processor Features: New Preamp stage provides Input Gain, 48V, 90Hz filter and 30dB pad Compressor section with control of: Threshold, Ratio, Gain Make-Up and Output Gain New Hard/soft knee compression modes Four switchable Attack times from Fast (0.5mS) through to Slow (40mS) Four switchable Release times from Fast (40mS) through to Slow (4S) New Optical gate with variable control of Threshold (from -10dB to off) Switchable VU metering of input level, output level or gain reduction Drive and Peak LEDs to indicate internal signal level Front panel instrument input (for guitar, keyboard, etc.) Balanced XLR mic input LF EQ band gives
    MM-Ivory5051
    CA$979.99
    CA$1099.00 économisez 11%
  • TL Audio Ebony A1 Tube Preamp DI

    TL Audio Ebony A1 Tube Preamp DI

    The Ebony A1 Tube Preamp is a sleek-looking discrete Class A preamp designed to heighten your audio experience. It uses Discrete Class A circuitry and has an optional tube stage with variable drive putting you in control of how creamy or how cool your unit sounds. Hand assembled in England to the highest standards, the Ebony uses stylish, quality chrome knobs together with a high-gloss black finish to make the exterior look just as smooth as the circuits sound. The Ebony Series have all the features you come to expect with TL Audio, including balanced I/O, multi input options, analogue VU metering and intuitive, precise controls. All units are also compatible with the TL Audio DO-2 digital SPDIF interface for easy digital connectivity with high quality conversion. A combination of supreme quality, unrivalled sound, and stylish aesthetics: This range offers superior analog processing to accompany a digital world.
    MM-Ebony A1
    CA$1149.00
     
  • TL Audio TL Audio Ebony A3 Tube Mono Channel Strip

    TL Audio TL Audio Ebony A3 Tube Mono Channel Strip

    The Ebony A3 Tube Mono Channel Strip is a sleek-looking discrete Class A channel strip designed to heighten your audio experience. It uses Discrete Class A circuitry and has an optional tube stage with variable drive putting you in control of how creamy or how cool your unit sounds. Hand assembled in England to the highest standards, the Ebony uses stylish, quality chrome knobs together with a high-gloss black finish to make the exterior look just as smooth as the circuits sound. The Ebony Series have all the features you come to expect with TL Audio, including balanced I/O, multi input options, analogue VU metering and intuitive, precise controls. All units are also compatible with the TL Audio DO-2 digital SPDIF interface for easy digital connectivity with high quality conversion. A combination of supreme quality, unrivalled sound, and stylish aesthetics: This range offers superior analog processing to accompany a digital world.
    MM-EbonyA3
    CA$1349.00
     
  • TL Audio Ebony A2 Tube Stereo Processor

    TL Audio Ebony A2 Tube Stereo Processor

    The Ebony A2 Tube Stereo Processor is a sleek-looking discrete Class A processor designed to heighten your audio experience. It uses Discrete Class A circuitry and has an optional tube stage with variable drive putting you in control of how creamy or how cool your unit sounds. Hand assembled in England to the highest standards, the Ebony uses stylish, quality chrome knobs together with a high-gloss black finish to make the exterior look just as smooth as the circuits sound. The Ebony Series have all the features you come to expect with TL Audio, including balanced I/O, multi input options, analogue VU metering and intuitive, precise controls. All units are also compatible with the TL Audio DO-2 digital SPDIF interface for easy digital connectivity with high quality conversion. A combination of supreme quality, unrivalled sound, and stylish aesthetics: This range offers superior analog processing to accompany a digital world.
    MM-Ebony A2
    CA$1599.00
     
  • TL Audio PA-1 Pentode Pre Amp

    TL Audio PA-1 Pentode Pre Amp

    The PA-1 Pentode Preamp is TL Audio's top-of-the-range preamp, producing a stunning sound from any source. The PA-1 offers several improvements over its best selling forerunner, including a raven blue 6mm aluminum front panel, General Electric US military-specification ECC83/12AX7A valves, gold-plated ceramic valve bases, and circular back-lit VU meters which monitor output level. Internal circuitry has been refined too, to offer smoother frequency response around the valve stages and provide extra output gain, thus enabling easier interfacing with digital recorders. All microphones-from an inexpensive dynamic to a top quality condenser-produce a fuller, more open and more vibrant sound when fed through the PA-1, and instruments fed through the dedicated front panel DI input take on added weight and presence. Separate input and output level controls give the ability to drive the valve stages harder for increased warmth while being able to simultaneously control the overall output level. Switchable high- and low-pass filters, LED level indicators, and a phase reverse facility are refinements that make the PA-1 a natural choice for any track laying or direct-to-tape recording situation. The PA-1 differs from TL Audio's standard hybrid preamp design-it features a transformer coupled mic input followed by a low-noise, high-gain EF86 pentode valve. Two further triode valve stages (supplied by 250v DC) are incorporated into each channel. The instrument input bypasses the transformer and feeds straight into the pentode valve. TL Audio's usual high-drive solid state output stage completes the signal chain. TL Audio Pentode Pre Amp Regular Specifications: Mic Input: Impedance: > 1.5k Switchable input gain 20-50dB in 10dB steps, with + / - 12dB variable trim control Input noise (EIN): -122dBu (22Hz to 22kHz) Distortion at 20dB of gain and 0dBu output: 0.05%. Max input level: +6dBu. Balanced XLR connector Instrument Input: Impedance 50k Nominal sensitivity for 0dBu output: -35dBu Unbalanced jack connector Output: Balanced output impedance: < 10 Max level: +22dBu into 600 XLR connector Unbalanced output impedance: 47 Max level: +20dBu into 10k Jack connector Frequency response: 30Hz to 40kHz +0 / -2dB Power supply: 110-120v or 220-240v AC Power consumption: 35VA typical Dimensions: 483 x 205 x 88mm (19" 2U) Weight: 6 kg. Shipping Weight: 7 kg. TL Audio Pentode Pre Amp Regular Features: 2 channels of high-quality valve pre-amplification Balanced transformer coupled microphone inputs Front panel unbalanced jack instrument inputs Balanced line outputs, switchable for +4dB or +18dB operation Line outputs duplicated on unbalanced jack connections 48V phantom power Switchable input gain control (20 to 50dB in 10dB steps) with continuously variable +/- 12dB trim Switchable high- and low-pass filters (12dB / octave), applies to all inputs High-pass filter has cut offs for frequencies of 50Hz, 100Hz, or 150Hz Low-pass filter has cut offs for frequencies of 5kHz, 10kHz, or 15kHz Rotary faders for controlling output level Phase reverse switch on Channel B Drive and Peak LEDs indicate internal signal levels Circular back-lit VU meters monitor output level Frequency response 30Hz to 40kHz +0 / -2dB
    MM-PA1
    CA$1649.95
    CA$1759.00 économisez 6%
  • TL Audio Ivory 5052 Stereo Valve Tube Processor

    TL Audio Ivory 5052 Stereo Valve Tube Processor

    The TL Audio 5052 Stereo Valve Processor is the latest addition to the best-selling Ivory 2 series. The 5052 provides everything you would expect from a high quality channel strip product, and then doubles it,making it the ideal system front end and the perfect stereo mixdown and mastering device. While most channel strip products provide a single mono channel made up of preamp, dynamics and EQ stages, the 5052 provides two channels of each with independent stereo linking of the compressor, EQ, and limiter sections. Recording a mono or stereo source to multi-track through the 5052 becomes simplicity itself, yet when it comes to mixdown, the 5052 comes into its own by offering full stereo linked EQ and dynamics, allowing unparalleled processing of the stereo buss while mixing. Couple this supreme flexibility with TL Audio's class-leading valve circuit design, and the 5052 represents the ultimate tracking and mixing tool for today's digital environment. The 5052 utilizes six triode valve stages shared between the two channels, run from a high-quality internal 150V stabilized DC supply. TL Audio Ivory 5052 Stereo Valve Tube Processor Specifications: Preamp Input Gain: +16 to +60dB (mic input), -20 to +20dB (line input) Compressor: Threshold: +10 to -20dB, Ratio: 1:1.5 to 1:30 Attack: 0.5mS to 50mS ,Release: 40mS to 4S Gain Make Up: 0 to +20dB Equalizer: LF band: +/-15dB from 30Hz to 1kHz, shelving or peaking modes LM band: +/- 15dB from 50Hz to 3kHz, fully parametric, (Q variable between 0.5 and 5) HM band: +/- 15dB from 1kHz to 12kHz, fully parametric (Q variable between 0.5 and 5) HF band: +/- 15dB from 3kHz to 20kHz, shelving or peaking modes Limiter threshold variable: 0 to +20dB Master section output gain: to +15dB PSU internally adjustable for 115/230V operation Typical consumption: 30VA Dimensions: 483 x 250 x 132mm (3U 19?rack mounting) Shipping Weight: 9kg TL Audio Ivory 5052 Stereo Valve Tube Processor Features: Valve preamp stage with mic, line and instrument connections Valve compressor section with variable control of all parameters and both hard/soft knee modes Four-band valve EQ section with swept LF/HF bands and parametric mids Optical output limiter for transparent brick wall limiting VU metering of input level, output level and gain reduction Full stereo linking of compressor, EQ and limiter sections A wealth of analogue input, output and insert connections 24 bit digital interfacing via the optional DO-2 digital output card
    MM-Ivory5052
    CA$2459.99
    CA$2639.00 économisez 7%
  • TL Audio VP-1 Mono Valve Tube Processor

    TL Audio VP-1 Mono Valve Tube Processor

    TL Audio VP-1 In recent years, the analogue voice processor has become an indispensable direct link between microphone and multitrack recorder, enabling engineers to capture the highest quality vocal sound on tape or hard disc - without the compromises in sound quality that most mixing consoles impose. Going straight to multitrack through a well designed voice processor has unlocked the true potential of microphones and transformed the sound of modern vocal recordings. At TL Audio we
    MM-VP1
    CA$2999.00
     
  • Avalon VT-737SP Mono Mic Pre/Compressor/EQ

    Avalon VT-737SP Mono Mic Pre/Compressor/EQ

    The Avalon Vt 737sp Mono Mic Pre/Compressor/EQ is a combination tube preamp, opto-compressor and sweep equalizer, with output level and VU metering in 2 rackspaces. Balanced mic, front-panel instrument DI, and balanced line inputs. Class A preamp uses 2 cascaded, dual vacuum-tube triodes configured with minimum negative feedback. The Avalon Vt 737sp has a high-gain switch, high-pass filter, and hardwire relay bypass. Avalon Vt 737sp Mono Mic Pre/Compressor/EQ Specifications: Circuit topology: 4 dual triode vacuum tubes (Sovtek 6922), high-voltage discrete Class A Gain Range Microphone: Transformer balanced 850/2500 ohm, 0dB to +58dB Instrument: Unbalanced 1 meg ohm, 0dB to +30dB Line: Balanced Class A 20k ohms, -27dB to 28dB Maximum input level and connector types: Microphone26dB@25Hz, +30dB@1kHz balanced XLR Instrument+30dB unbalanced front panel jack socket Line +36dB balanced XLR Maximum output level: +30dB balanced 600 ohms, DC coupled, discrete Class A Output type and gain: XLR connector, output trim gain -45dB to20dB Noise 20kHz unweighted: -92dB Noise microphone EIN: -116dB, 22Hz-22kHz unweighted Distortion THD, IMD: 0.5% Frequency response -2.5dB: 10Hz-120kHz input filter included Frequency response -3dB: 1Hz-200kHz line in-out VU meter and gain reduction: High quality illuminated OVU =+4dB and gain reduction to -20dB High cut filter: Variable 6dB per octave 30Hz-140Hz Compressor type: Optical passive attenuator incorporating twin vacuum tubes and stereo link Threshold - Ratio: Threshold variable -30dB to +20dB, ratio-compression variable 1:1 to 20:1 Attack - Release: Attack variable 2mS to 200mS, release variable 100mS to 5 seconds Equalizer type: Discrete Class A, variable active and switched passive design Frequency bands (4): Treble - switched 10kHz, 15kHz, 20kHz, 32kHz, ±20dB range, shelf High mid - variable 200Hz-28kHz and 2kHz -28kHz, ±6dB range, hi-lo Q Low mid - variable 30Hz-450Hz and 300Hz-4k5Hz, ±16dB range, hi-lo Q Bass - switched 15Hz, 30Hz, 60Hz, 150Hz, ±24dB range, shelf AC power: Internal toroidal 100v to 240v, 50-60Hz selectable, 75 watts maximum Dimensions: 19 x 12 x 3.5 in (482 x 305 x 89mm) Weight: 22lbs. (10kg) Avalon Vt 737sp Mono Mic Pre/Compressor/EQ Features: Tube preamp Opto-compressor Sweep equalizer Output level control VU metering Balanced mic input, front-panel instrument DI, and balanced line inputs High-gain switch High-pass filter Hardwire relay bypass
    VT-737SP
    CA$3330.00
     

Catégories

Marques